Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton
Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight  2.7-3.3V Upgrade old Krypton

Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Maglight 2.7-3.3V Upgrade old Krypton

Vendor
Draco Products
Regular price
$13.52
Sale price
$13.52

Bright Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Flashlight 2.7-3.3V Replace old Krypton

                                        520 Lumen

UPGRADED now shipping CREE XL-M2 10-watt LED Chip (152-780 Lumens 2.7-3.3 Volts (520 lumens 3-Volts)

Cree LED 5W Bulb for MAGLITE® 2-Cell 3V Flashlights 2.7-3.3V Replace old Krypton 

STOP: Your Magnelite or Flashlight Must use this type of PR Flange base bulb for the LED upgrade to work. 

If you have an older light with the smaller xenon upgrade ring use OEM Maglite parts C & D Cell Lamp Retainer (200-057, 201-599) ring/collar/nut and this LED fit and work nicely.   

LED Flashlight Lamp PR Bulbs for Standard 2-C,  2-D, 2-AA Cell Flashlights 

Use this LED to upgrade standard 2-cell flashlights to superior brightness, efficiency, and longevity.

This 5.0W LED is a GREAT Upgrade bulb made for 2-cell MAG-LITE®'s !

Direct Replacement for: 2 C/D Cell PR FLANGE BULBES -  LWSA201, LMSA201, LMXA201 

This LED will be 520 lumens bright on fresh standard or alkaline batteries and (will not light below 2.4 Volts)

  • With new fresh Alkaline batteries, full voltage (1.6V x 2 = 3.2Volts), the LED will be very bright. As batteries discharge from full Voltage, this LED brightness will drop dramatically from 3.2V, 3.1V, 3.0V…..2.6V to about 2.55V Volts, and the LED will almost be off.

Stop this LED, which is NOT for your Fulton or  MX-991!

“Even new the 2-Cell Fulton’s biggest weakness is it's switch”.

These DC to DC leds below work well in most all flashlights and battery types 

We Recommend these LEDs also have a Great Upgrade LEDs made for both Regular or Rechargeable NiCad or Ni-Mh 2-6-cell lights ! 

We recommend these regulated LEDs to get the most light out of your batteries to be bright on low voltage batteries with high brightness from 2, 3, 4.5 – 9V when batteries are new or even half discharged!

Please See our Brighter Constant-current LED

5.0W CREE at 230+ lumens Bright - Cree 5-Watt LED Upgrade Bulb for MAG-LITE® 2 Cell Flashlights Replace Krypton

https://www.dracoproducts.net/products/cree-5-watt-led-upgrade-bulb-for-mag-lite%C2%AE-2-6-cell-flashlights-replace-krypton

3W Cree at 200+ Lumens - 3W - LED Upgrade Bulb for MAGLITE® 1 to 6 Cell Flashlights 0.4A, 1-9 Volt

https://www.dracoproducts.net/products/1w-led-upgrade-bulb-for-maglite%C2%AE-1-to-6-cell-flashlights-0-4a-1-9-volt-torch

  • Direct Replacement for: 2 C/D Cell PR FLANGE BULBES -  LWSA201, LMSA201, LMXA201 

--- Super Bright Led's for Less --- 

Simply replace your existing bulb with this LED – no modifications necessary!

  • Works with standard 2-cell flashlights
  • Very Bright 152-780 Lumens 2.7-3.3 Volts (520 lumens 3-Volts)
  • Minimizes battery and bulb replacement waste
  • LED Bulb is Standard Polarity with bottom contact (+) Flange (-)
  • The Focusability of the flashlight is preserved with these point-source LEDs
  • Brighter Light for an improved vision for enhanced visibility of fine detail
  • Longer battery life from high-efficiency LED
  • Long lamp life 50,000 hours of continuous use
  • Dependable and shock resistant
  • Easy To Install

*MAG-LITE® is a trademark of Mag Instrument, Inc. Draco Products is not affiliated with Mag Instrument, Inc.


Features:

INTENSE BRIGHT LIGHT 

FOCUSABILITY 

LONGER BATTERY LIFE 

INDESTRUCTIBLE LED 

EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary! 

See the difference!

* Increased Brightness and Longer Battery life run time.                 

 

1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.

 

2) Warning! - For safety always follow manufactures safety and operational instructions.  

 

3) Caution! - Remove batteries, turn-off or disconnect power before changing bulb.

 

 

Description:

Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb

2-cell battery operated products (Energizer Zink, Energizer Alkaline,  PowerGenix NiZi, Energizer AA lithium, NiCad, and NiMH batteries.


 ☛ ·       Buy two now and Save with discounted shipping, The right bulb is hard to find, so why not get two

******* This listing is for 10.0 Watt LED PR Lamp ******************


Also you may be interested in:

* AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size


This is a very popular style (P13.5S) bulb for Many Viewers, flashlights, and devices that run on TWO batteries.

*Cree is a trademark of Cree Corporation

Draco Products is not affiliated with Cree Corporation Inc.

LED Bulb is Standard Polarity with bottom contact (+) Flange (-) 

*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.

Thank You.

1 LED Flashlight Lamp, For 2 "C" Or "D" Size Batteries

The Lamp has a STANDARD 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch

 ★  FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers.  Thank You.

We want your repeat business!

© 2015-2023 Draco Products. All Rights Reserved