720 Lumen Brightest Cree XM-L2 10-Watt LED for Mag-lite
Cree LED 10 Watt Flashlight Lamp PR Bulbs for Standard 3 C, 3 D, 3 AA Cell Flashlights
Use this LED to upgrade standard 3-cell flashlights to superior brightness, efficiency, and longevity.
STOP: Your Magnelite or Flashlight Must use this type of PR Flange base bulb for the LED upgrade to work.
If you have an older light with the smaller xenon upgrade ring use OEM Maglite parts C & D Cell Lamp Retainer (200-057, 201-599) ring/collar/nut and this LED fit and work nicely.
This 10.0W LED is a GREAT Upgrade bulb made for the 3.6V NiCad Versapak Black & Decker or 3-cell MAG-LITE®'s!
Direct Replacement for 3 C/D Cell PR FLANGE BULBS - LWSA301, LMSA301, LMXA301
We also have a LED replacement for 2-Cell Maglites:
Cree LED 10W Bulb for MAGLITE® 2-Cell 3V Flashlights 2.7-3.3V Replace old Krypton
--- Super Bright LEDs for Less ---
Simply replace your existing bulb with this LED – no modifications necessary!
- Bright 10w, 480lm - 720 lm Brightness 3.8V to 4.5V
- We rate conservatively at least 720 Lumens (About 800 Lumens at 4.65Volts)
- Works with standard Quality 3 cell flashlights
- Minimizes battery and bulb replacement waste
- Focusability of the flashlight is preserved with these point source LEDs
- Brighter Light for an improved vision for enhanced visibility of fine detail
- Longer battery life from high efficiency LED
- Long lamp life 50,000 hours of continuous use
- Dependable and shock-resistant
- Easy To Install
*MAG-LITE® is a trademark of Mag Instrument, Inc. Draco Products is not affiliated with Mag Instrument, Inc.
Features:
INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens/watt. These LED to maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to amber light.
INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary!
 |
|
|
1) Warning! - Do not look directly into lit LED Lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage. |
|
|
|
|
|
2) Warning! - For safety always follow manufactures safety and operational instructions. |
|
|
|
|
|
3) Caution! - Remove batteries, turn-off or disconnect power before changing the bulb. |
|
|
|
Description:
Upgrade / Replacement for standard flashlight Lamp used in many applications that take a flange base light bulb
3-cell battery-operated products (Energizer Zink, Energizer Alkaline, PowerGenix NiZi, Energizer AA lithium, NiCad, and NiMH batteries.
☛ · Buy two now and Save with discounted shipping, the right bulb is hard to find, why not get two
******* This listing is for 10.0 Watt 720 Lumen LED PR Lamp ******************
|
|
Also, you may be interested in:
* Other Sizes .2W or .5W for extra-long battery life please see table below and my other listing.
* AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size
This is a very popular style (P13.5S) bulb for Many Viewers, flashlights, and devices that run on THREE batteries (will work but not as bright if used on 2 cells)
LED Bulb is Standard Polarity with bottom contact (+) Flange (-)
*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.
Thank You.
1 LED Flashlight Lamp, For 3 "AA" Or "C" Or "D" Size Batteries
The Lamp has a STANDARD 'PR' Base - P13.5s is the International standard flanged base, 9.2mm Diameter, with flange "V" notch
★ FEEDBACK: Please return a positive review for good service, We automatically leave positive feedback for all customers. Thank You.
We want your repeat business!
© 2015-2023 Draco Products. All Rights Reserved