Cree 5Watt LED FOR DeWALT DW9083 DW908 DW919 18V Pivoting light-With Out DCA1820
**** NOT FOR DW918 or DCA1820 18V to 20V Li-ion adapter which Is reversed Polarity *** See listing for DW918 ********
Simply replace your existing bulb with this LED – no modifications necessary!
*Please note, LED bulb will be bright but not as bright as highest power Krypton or Xenon bulb over 10 watts.
- Universal Voltage Works with standard flashlights and Work Lights 9 Volt to 30 Volts
- Universal Polarity DC Polarity (+ or -) on bottom contact or Flange !
- Minimizes battery and bulb replacement waste
- Focusability of flashlight is preserved with these point source LEDs
- Brighter Light for improved vision for enhanced visibility of fine detail
- Longer battery life from high efficiency LED
- Long lamp life 50,000 hours of continuous use
- Dependable and shock resistant
- Easy To Install
Features:
INTENSE BRIGHT LIGHT output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
MAXIMUM EFFICIENCY These LEDs are powered below their maximum rating for longer life and higher lumens per watt of battery power.
LONGER BATTERY LIFE results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.
INDESTRUCTIBLE LED performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL as if just replaces your existing bulbs - no modifications necessary
Standard PR Incandescent vs. LED
Upgrade / Replacement for standard Work Light applications that take a flange base light bulb for 9-30 Volt battery operated products (Zink, Alkaline, lithium, NiCad).
*EPISTAR is a trademark of EPISTAR Corporation
*CREE is a trademark of Cree, Inc.
* Draco Products is not affiliated with Epistar Corporation or Cree, Inc.
☛ · Buy two now and save with discounted shipping, the right bulb is hard to find, why not get two?
This is a very popular style of bulb for Many Work Lights, flash lights, and work lights
Universal Polarity LED with bottom contact Positive or Negative!
*Specifications are accurate for this Miniature LED Bulb. Applications for this standard Flange type bulb are too numerous to list so the purchaser is responsible for compatibility with their actual product.
The Lamp has a STANDARD 'PR' Base - P13.5s is an International standard flanged base, 9.2mm Diameter, with flange "V" notch
★ Thank You. Please return a positive review for good service, Thank You.
© 2015-2023 Draco Products. All Rights Reserved